Turn your brew day into fresh pours on tap. Our kegging range covers ball lock and pin lock kegs, regulators, gas cylinders, disconnects, manifolds, beer line, gas line, taps, and chillers. Chill the keg, purge oxygen, and set a steady PSI. Match hose diameter and length to your pressure and temperature so you pour clear beer with foam under control. Clean as you go, replace worn seals, and keep clamps tight for trouble-free service.

Build a first setup or step up to a multi-tap bar. Add a gas splitter for two kegs, use a drip tray to keep the bench tidy, and run a dedicated fridge for stable pours. Stick to one pressure for house ales, then dial in lagers and stout on separate lines.

What do I need to start kegging?
Grab a clean keg, CO₂ bottle, dual-gauge regulator, gas and beer disconnects, beer and gas line, clamps, a tap, and a fridge or kegerator. Chill the beer, set pressure, purge headspace, and give the keg a few days cold so carbonation dissolves evenly before the first pour.

How do I stop foam and get a clean pour?
Keep the keg and lines cold. Set stable pressure that matches your beer temperature. Balance restriction with the right line diameter and length. Open the tap fully and avoid kinks or sharp rises. Use short shanks in warm towers or add a fan to move cold air.

Our home brew keg systems and accessories are perfect for any serious brewer out there who is looking for the best. Our keg gear must always meet the highest quality standards which you will find with all our kegging homebrew equipment for sale, as well as a great range of kegerators, kegs, regulators, tap sets, pluto guns and keg hardware.

Browse the extensive collection of keg systems and accessories right here at Australian Home Brewing and find the perfect ensemble for your home-made beer requirements.

Your First Choice for Top Class Brewing Equipment

Australian Home Brewing has for over 50 years  been the country’s go-to for supplying top class brew equipment. This is because we care about the quality of our products, and the quality of your brew. We trial and test every recipe, every brew ingredient, every piece of brewing equipment and still system we distribute to our community of home brew lovers, as it is our mission to ensure that they are of the highest quality.   

The same goes for our extensive collection of top of the range kegging systems and accessories available both online and at our Melbourne locations. Here you will find some of the best kegging, dispensing equipment and keg hardware to ensure the storage and dispensing of your quality beers – we guarantee it.

Have Any Enquiries for Our Team?

If you would like to find out more regarding the range of kegging equipment available at Australian Home Brewing, or would like to enquire about a specific keg, please feel free to get in contact with our friendly team of staff.

Send us a message on our contact page or give us a call at one of our Melbourne locations and one of our friendly team will be happy to assist you with your enquiries.